1. Home
  2. /
  3. Plaster
  4. /
  5. Techno P 08

Techno P 08

Coarse Finishing Plaster

Introduction:

One component colored decorative wall finishing plaster applied 5 – 10 mm thickness, ready to use.

Advantages: Easy to apply, Water resistance, Excellent Adhesion, to concrete, Available in many colors.

Method of Use:

To ensure proper mixing, a mechanically powered mixer with suitable paddle should be used to mix 4 liter of clean water with 20 kg powder, mixing time should be continued until uniform consistency is obtained. Spread product mixture on the surface and the applied by trowel by 5 mm -10 mm thickness. After 4 hour @25°C the finish coat requires the indented trowel to harden the worked surface. Water addition may very slightly according to both the ambient temperature and the desired consistency of the mix, but it should not exceed 4.5 liter.

Yield:

2.5 m²/20 kg by thickness 7 mm

Curing:

Curing is not generally required. Applied product should be allowed to cure naturally at room temperature for at least 24 hour.

Shelf Life:

Techno P 08 is 12 [email protected]°C-40°C in dry and shaded area.

Packing:

Techno P 08 is 12 [email protected]°C-40°C in dry and shaded area.

Fire:

Techno P 08 is non flammable

Health and Safety:

Techno P 08 may cause irritation to skin or eyes. In case of accidental with eyes, immediately flush with plenty of water at least 10 minutes and seek medical advice if necessary .

You may also like

Techno P 07
Menu
TPP Factory Co. Ltd.