1. Home
  2. /
  3. Plaster
  4. /
  5. Techno P09 Primer

Techno P09 Primer

Internal & External Plaster

Introduction:

External render is one component polymer modified to use cementations plaster. External render is composed of a blend of cement, sand, dry powders, aggregates and selected polymers when mixed with water produced a thyrotrophic mortar suitable for plastering on vertical and overhead surfaces.

Internal render cement based, high quality, ready mixed plastering mortar for manual application.

Properties:

* Very high productivity rates.
* Excellent bonding characteristics.
* Excellent resistance to extreme weather conditions.
* Maximum protection against salt formation or florescence compared with conventional plasters.

Application:

Plastering of concrete and blocks surfaces internally and externally.

Advantages:

Easy to apply. Single component requires only addition of water. Extremely low permeability to water providing excellent protection to steel reinforcement and host concrete. Shrinkage controlled polymer modified cementations plaster. Thyrotrophic properties allowing extra high build, and for vertical and overhead application. Suitable for internal and external application. Water vapor permeable.

Method to Use:

Priming areas to be plastered must be clean and free from oil, grease, dust, laitance should be soaked with clean water before applying the plaster.

Mixing:

To ensure proper mixing a mechanically powered mixer or drill fitted with suitable paddle should be used.
3 to 4 litter of clean water should be added to clean container. The powder is then added slowly to the water while mixing continuously with low speed mixer/drill. Mixing time should be continued until uniform consistency is obtained.

Placing and Finishing:

Techno P09 Primer is applied by trowel. The mixed mortar should be applied using film pressure to fully compact mortar to ensure good adhesion with the substrate, finishing and leveling should be carried out initially by wooden or plastic float. Final finishing should be carried out using steel float.

Yield:

Approximately 5.75-6 m2 @ 2 mm thickness / 20kg

Cleaning:

All tools should be cleaned immediately after application using fresh water.

Fire:

Techno P09 Primer is non-flammable.

Storage:

Techno P09 Primer has a shelf life of 12 months if stored at temperatures between 2-50C.

Cautions:

Techno P09 Primer may cause irritation to skin or eyes, in case of accidental contact with eyes, immediately flush with plenty of water for at least 10 minutes and seek medical advice if necessary.

Packing:

20 kg.

You may also like

Technofix GP*
Techno P 10
Menu
TPP Factory Co. Ltd.