Introduction:
Single component colored decorative wall finishing plaster applied in 5 – 15 mm thickness, ready to use.
Advantages:
Easy to apply, No independent primer necessary, Shringage controlled polymer modified, Excellent adhesion to concrete, Compatible with other types of coatings, Available in many colors, Curing not generally required.
Priming:
Area to be plastered should be sound and clean and all contaminants must be removed prior to the application of P10.
Method of Use:
To ensure proper mixing, a mechanically powered mixer with suitable paddle should be used to mix 5 liter of clean water with 20kg powder, mixing time should be continued until uniform consistency is obtained. Spread product mixture on the surface and the applied by trowel by 5mm – 15mm thickness.
Water addition may vary slightly according to both the ambient temperature and the desired consistency of the mix, but it should not exceed 5.5 liter.
Yield:
2.5 m² / 20kg by thickness 5 mm.
Curing:
Curing is not generally required. Applied product should be allowed to cure naturally at room temperature for at least 24 hours.
Shelf Life:
Techno P 10 is 12 months at 2°C – 40°C in dry and shaded area.
Packing:
Techno P 10 is available in 20 kg bags.
Fire:
Techno P 10 is non flammable.
Cautions:
Techno P 10 may cause irritation to skin or eyes. In case of accidental with eye, immediately flush with plenty of water for at least 10 minutes and seek medical advice if necessary.
